Plywood & Woodworking Presses
HEMSUN ENGG. INDUSTRIES manufactures heavy-duty Plywood & Woodworking Presses and multi-daylight hydraulic hot presses at our Dahegam (Gujarat) works. Browse daylight configurations and platen dimensions below.
Plywood & Woodworking Presses — Working Principle & Engineering Architecture
The hydraulic mechanism employs synchronized multi-ram circuits powered by low-noise axial piston pumps and high-flow prefill valves. Operating at capacities of 280 Ton, 400 Ton, 640 Ton, and 800 Ton with 300 mm stroke and 100 mm daylight gaps, the press executes rapid closing, controlled pressure ramp-up, and programmable hot-pressing dwell cycles (120 to 240 seconds at 110°C–160°C). Multi-zone steam, thermal oil, or electric platen heating guarantees temperature uniformity within ±2°C across every daylight.
Hydraulic synchronization across all 8 cylinders is maintained via matched manifold valving and heavy-duty rack-and-pinion mechanical equalizing guides. This ensures platens remain perfectly parallel during full-tonnage closing, preventing resin migration and board taper. Automatic breathing (degassing) logic allows steam and volatile gases to vent during the critical cure window, yielding flat, blister-free boards conforming to IS:303 and IS:710 quality benchmarks.
Types & Configurations We Build
Plywood & Woodworking Presses — Sizing & Capacity Calculations
Plywood & Woodworking Presses is engineered with heavy-duty multi-cylinder architecture (standard 8-cylinder configurations with 125 mm ram bore) to ensure even specific pressure across the entire 8'×4', 9'×4', 11'×4', or 13'×4' platen surface. Built for heavy timber veneers, commercial and marine grade plywood, flush doors, blockboard, and decorative laminates, our presses eliminate core gaps, bubbling, and thickness variation under sustained heat and tonnage.
Sizing & Tonnage Calculations:
To size a plywood hot press, total tonnage is calculated from platen working area and required specific pressure (typically 10 to 18 kg/cm² for hardwood plywood and 8 to 14 kg/cm² for softwood veneers):
Formula: Required Tonnage (Ton) = (Platen Length in cm × Platen Width in cm × Specific Pressure in kg/cm² / 1000) × 1.15
Example: For a standard 8'×4' platen (250 × 130 cm = 32,500 cm²) pressing commercial plywood at 15 kg/cm², required press capacity is 560 Ton to 640 Ton across an 8-cylinder hydraulic bank.
Plywood & Woodworking Presses — Technical Specifications & Machine Parameters
| Parameter / Specification | Standard Range / Feature |
|---|---|
| Equipment Category | Plywood & Woodworking Presses (Plywood Series HSW) |
| Capacity Bands | 280 Ton / 400 Ton / 640 Ton / 800 Ton (Custom up to 1,500 Ton) |
| Number of Daylights | 5, 10, 15, 20, 24 Daylights (Daylight gap: 100 mm) |
| Hydraulic Cylinders | 8 Cylinders (Ram Bore: 125 mm, Stroke: 300 mm) |
| Platen Dimensions | 8'×4' (2500×1300 mm), 9'×4', 11'×4', 13'×4' Solid Steel |
| Heating Medium | Steam, Thermal Fluid Oil, or Electric Heated Platens (up to 180°C) |
| PLC Automation | Siemens PLC with Touchscreen HMI, Degassing Timer & Cycle Log |
| Manufacturing Origin | Manufactured & Tested in Dahegam, Gandhinagar, Gujarat, India |
Plywood & Woodworking Presses — Material Compatibility & Engineering Metallurgy
- Core Veneers & Face Veneers: Hardwood and softwood peeled wood veneers coated with UF, MUF, or Phenol Formaldehyde resin.
- Commercial & Marine Plywood: IS:303 and IS:710 grade bonded panel stacks pressed under sustained thermal cycles.
- Flush Doors & Blockboard: Solid wood timber frames, battens, and crossbands hot-pressed into warp-free doors.
- Decorative & High-Pressure Laminates: Phenolic craft paper and melamine surface overlays pressed at 100–140 kg/cm².
- MDF & Particle Board Panels: Wood particle and fiber mats bonded with synthetic thermoset adhesives under high tonnage.
Plywood & Woodworking Presses — Procurement & Tooling Selection Guide
Key technical criteria when selecting plywood presses:
- Number of Daylights: Choose 5, 10, 15, 20, or 24 daylights matching required daily panel capacity.
- Platen Construction: Precision-drilled solid steel platens with serpentine thermal channels for steam or hot oil circulation.
- Cylinder Synchronization: 8-cylinder bank with 125 mm ground rams ensures zero platen deflection over 8'×4' to 13'×4' spans.
- Hydraulic Automation: PLC-controlled auto-breathing (degassing) cycles to vent steam and glue volatiles.
- Loading Automation: Manual push-in or motorized multi-tier simultaneous automatic cage loaders and unloaders.
Plywood & Woodworking Presses — Testing, Inspection & Global Commissioning
HEMSUN ENGG. INDUSTRIES supplies complete turnkey plywood press lines including hydraulic power units, boiler/thermopac piping manifolds, automatic loading elevators, and on-site foundation commissioning across India, Southeast Asia, the Middle East, and Africa.
Frequently Asked Questions
What does HEMSUN list under Plywood & Woodworking Presses?
Explore Plywood & Woodworking Presses from HEMSUN (Dahegam, Gandhinagar, Gujarat, India). Review technical specifications, standard configurations, and drawing-
Can I request a quote from the Plywood & Woodworking Presses catalog page?
Yes. Use the contact page or RFQ buttons on detail pages. Include part drawing, size list, or machine tonnage target so our engineering team can respond with scope and lead time.
Does HEMSUN export products listed in Plywood & Woodworking Presses?
Yes. IEC-registered export documentation is available for qualified orders worldwide. Domestic buyers receive GST invoice and standard dispatch documentation.