UHMWPE Machined Components — Material Specifications, Engineering Data & OEM Supply
Built to international industrial standards, UHMWPE Machined Components from HEMSUN delivers low friction and universal chemical inertness for uhmwpe machined components components. Fabricated in Dahegam, Gandhinagar, Gujarat, India from high-density UHMWPE with full material certification.
Where UHMWPE Machined Components is used
Selected for abrasion and impact resistance in slurry and bulk-handling duty, where wear life matters more than temperature range.
Common where an obsolete or single-source part must be reproduced from a drawing, a sample, or measurement of the worn original.
Key properties
In-house UHMWPE Machined Components production
moulding and CNC under one roof
Drawing, CAD (STEP/IGES/DXF), or sample-based reverse engineering
UHMWPE grade options matched to chemical and thermal duty
Dimensional inspection with reports on request
IEC-registered exporter
worldwide packing and docs
Flexible MOQ
prototypes, pilot lots, recurring OEM supply
Specifications
| Property | Value |
|---|---|
| Component Type & Grade | UHMWPE Machined Components (Specification Code HES-678) |
| Base Raw Material | UHMWPE (Virgin FDA 21 CFR 177.1550 / Custom Filled) |
| Continuous Service Temp. | -200°C to +260°C (-328°F to +500°F) |
| Tensile Strength at Break | 20 to 35 MPa (Virgin) / 14 to 25 MPa (Filled) |
| Elongation at Break | 250% to 450% (ASTM D4894) |
| Specific Gravity / Density | 2.14 to 2.18 g/cm³ (ASTM D792) |
| Dielectric Strength | 50 to 80 kV/mm (0.1 mm film) |
| Surface Roughness Finish | Diamond Polished Ra ≤ 0.20 µm to Ra ≤ 0.40 µm |
| Dimensional Tolerance | ISO Grade 1 to Grade 3 / Drawing Nominals (±0.02 mm) |
| Manufacturing & Origin | Moulded, Sintered & CNC Machined in Dahegam, Gandhinagar, Gujarat, India |
Manufacturing process
UHMWPE Machined Components is manufactured at our Dahegam facility using high-pressure compression moulding followed by computer-controlled oven sintering up to 370°C and precision CNC finishing. Raw UHMWPE resin is cold-pressed at 300 to 450 kg/cm² (3,000 to 4,500 psi) into rigid green preforms. Sintering under programmed heating ramps enables complete particle coalescence, eliminating internal porosity and yielding high tensile and dielectric strength.
Material selection notes
The chemical resilience of UHMWPE ensures UHMWPE Machined Components remains completely impervious to corrosive chemicals, steam, and industrial fuels. Its low frictional properties reduce torque requirements in valve assemblies and prevent galling against mating metal faces.
How to specify your order
Sizing and ordering UHMWPE Machined Components: Share drawing files (STEP/PDF), annual volume projections, and any compliance requirements (FDA, USP Class VI). Our technical department confirms tooling costs, sample schedules, and volume production lead times.
Quality checks and inspection
Every batch of UHMWPE Machined Components undergoes stringent quality checks at our Dahegam plant: laser micrometer diameter scanning, surface roughness profilometry (Ra ≤ 0.2 µm), and tensile/elongation testing per ASTM D4894 to ensure complete material coalescence.
Ordering and export documentation
Domestic UHMWPE Machined Components orders ship with GST invoice and e-way bill where applicable. Export orders include commercial invoice, packing list, and certificate of origin from our IEC-registered works. Recurring supply schedules supported with fixed drawing revision and lot numbering for plant stores Contact info@hemsun.com or sales@hemsun.com with your UHMWPE components specification.
Export packing and lead time
HEMSUN ENGG. INDUSTRIES supplies UHMWPE Machined Components to international valve and pump manufacturers globally. Export orders include comprehensive quality certificates, packing lists, and seaworthy timber boxing compliant with ISPM 15 standards.
Storage and handling
Guidelines for UHMWPE Machined Components: Handle with clean gloves during precision assembly. Ensure mating metallic seats and shafts exhibit surface finishes of Ra ≤ 0.4 µm for maximum component operating life.
Compliance & Standards
HEMSUN is a DGFT IEC registered exporter (Government of India). Critical dimensions are verified on CMM against the drawing you supply, and the inspection report is issued against your part number and revision. Export paperwork — commercial invoice, packing list and certificate of origin — accompanies international despatch.
Frequently Asked Questions
What UHMWPE Machined Components options does HEMSUN manufacture?
Built to international industrial standards, UHMWPE Machined Components from HEMSUN delivers low friction and universal chemical inertness for uhmwpe machined components components. Fabricated in Dahegam, Gandhinagar, G…
Can you supply UHMWPE Machined Components for OEM and export orders?
Yes. We support prototype lots, recurring OEM programmes, and export packing with material certificates and dimensional inspection reports on request. Typical RFQ response is within one business day when drawings are complete.
How do I request a quote for UHMWPE Machined Components?
Send material grade, dimensions or drawing, quantity, application media, and operating temperature/pressure via https://hemsun.com/contact. Our engineering team confirms manufacturability, lead time, and pricing.