Triple Action Deep Drawing Press
Triple Action Deep Drawing Press — Machine Specifications, Tool Steel Dies & Operating Parameters
Fabricated at our Gujarat facility, the Triple Action Deep Drawing Press (Series HSE-836) offers precision pressing force for deep-drawn cylindrical shells, auto oil sumps & cookware basins. Built with ground bolster plates, proportional hydraulics, and PLC recipe storage for domestic and overseas plants.
Applications
- Precision deep drawing of deep-drawn cylindrical shells, auto oil sumps & cookware basins with closed-loop blank holder force regulation (Workstation: APP-4436).
- Multi-stage metal forming for automotive, cookware, and aerospace press shops.
- Integrated hydraulic bottom cushion to prevent blank wrinkling, tearing, and wall thinning.
- High-speed automated production with optoelectronic safety guarding and CE/IEC compliance.
Triple Action Deep Drawing Press — process notes
The Triple Action Deep Drawing Press applies 207 Ton of rigid compressive force to produce deep-drawn cylindrical shells, auto oil sumps & cookware basins (Drawing blank diameter Ø 411 mm, draw depth up to 461 mm). A variable displacement hydraulic circuit accelerates cycle times while maintaining a steady 135-second dwell under load. Regulated pressure bleed-off eliminates internal cleavage stresses prior to automated part ejection.
Triple Action Deep Drawing Press — material behaviour
The mechanical design addresses the high volumetric reduction of sheet metal blanks (mild steel, SS 304/316, aluminum, brass) powders by providing extended cylinder stroke lengths. Stable platen guidance prevents uneven compaction, ensuring high yield rates across production batches.
Triple Action Deep Drawing Press — tooling design
Our toolroom integrates vacuum-hardened AISI D2 steel dies (58–62 HRC) directly onto the press bolster. Precision guide columns and self-aligning ball seats prevent uneven punch wear during high-volume compaction of deep-drawn cylindrical shells, auto oil sumps & cookware basins.
Triple Action Deep Drawing Press — sizing and selection
When specifying this 207 Ton Triple Action Deep Drawing Press system, key inputs include part diameter/height, powder bulk density, and desired cycle automation. Our engineering department verifies required tonnage, stroke clearances, and hydraulic motor power to match your plant capacity.
Triple Action Deep Drawing Press — quality checks
Each press is tested against strict quality standards at our Dahegam facility: laser alignment of bolsters, continuous pressure dwell cycling, and green compact density verification.
Triple Action Deep Drawing Press — installation and commissioning
HEMSUN ENGG. INDUSTRIES supplies complete electrical schematics, hydraulic P&ID diagrams, foundation anchoring templates, and spare seal kits. Our field service engineers provide on-site installation, hydraulic oil charging (ISO VG 68), commissioning, and comprehensive machine operator training worldwide.
Triple Action Deep Drawing Press — export and lead time
Export compliance includes multi-voltage electrical switchgear (415V/50Hz), IEC documentation, and heavy-duty timber crating with anti-corrosion barrier wrapping for ocean freight.
Triple Action Deep Drawing Press — maintenance and spares
Upkeep protocols specify hydraulic fluid replacement at 2,000 hours, routine guide post greasing, and seal evaluations. Replacement valves and seal packages ship promptly from our Gujarat facility.
Triple Action Deep Drawing Press — safety notes
Operator protection is achieved through dual-channel infrared curtains, anti-tie-down pushbuttons, hydraulic counterbalance fall-prevention valves, and interlocked perimeter guarding.
Specifications
| Property | Value |
|---|---|
| Machine Model & Series | Triple Action Deep Drawing Press (Series HSE-DD-836) |
| Main Ram & Blank Holder Force | 150 Ton Main / 75 Ton Cushion |
| Platen Bolster Dimensions | 736 × 736 mm T-slotted steel bolster |
| Main Ram Daylight & Stroke | 736 mm daylight / 586 mm draw stroke |
| Fast Approach & Drawing Speed | Approach up to 200 mm/s | Drawing 10–25 mm/s | Return 160 mm/s |
| Bottom Hydraulic Die Cushion | Proportional blank holder pressure with digital depth control |
| Target Workpiece Envelope | Drawing blank diameter Ø 411 mm, draw depth up to 461 mm |
| Main Motor & Pump Drive | 26 HP Variable-displacement axial piston pump |
| Hydraulic Reservoir Volume | 286 Liters ISO VG 68 with heat exchanger |
| PLC & HMI Interface | Siemens PLC with multi-stage drawing recipe storage |
| Safety Architecture | Category 4 Optical Light Curtains & Dual Anti-Drop Safety Valves |
| Manufacturing & Origin | Engineered & Tested at Dahegam, Gandhinagar, Gujarat, India |
Related Machinery, Tooling & Technical Guides
Category & Machinery Hubs
Engineering Process Guides
Frequently Asked Questions
What is the Triple Action Deep Drawing Press used for?
The Triple Action Deep Drawing Press from HEMSUN ENGG. INDUSTRIES is engineered for Precision deep drawing of deep-drawn cylindrical shells, auto oil sumps & cookware basins with closed-loop blank holder force regulation (Workstation: APP-4436).; Multi-stage metal forming for automotive, cookware, and aerospace press shops.; Integrated hydraulic bottom cushion to prevent blank wrinkling, tearing, and wall thinning.. Share your part drawing, powder type, and annual volume so we can match tonnage, cavity layout, and automation.
Can HEMSUN customize the Triple Action Deep Drawing Press tonnage and controls?
Tonnage and frame are engineered to enquiry. Push-button, PLC/HMI, or CNC packages are available. When specifying this 207 Ton Triple Action Deep Drawing Press system, key inputs include part diameter/height, powder bulk density, and desired cycle automation. Our engineering d…
Do you install and train operators for the Triple Action Deep Drawing Press?
Yes. Installation, commissioning, and operator training are available for domestic and export shipments. Engineered & Tested at Dahegam, Gandhinagar, Gujarat, India. Export documentation (commercial invoice, packing list, certificate of origin) is provided for qualified orders.
Ready to Put Your Drawing Into Production?
Send your specification and our engineering team will scope your PTFE components, hydraulic machine, or turnkey project — no obligation.
- Quote response within 24 hours
- Built entirely in our own facility
- Export documentation included
Request a Quote
Tell us what you need — material, drawing, or sample — and we'll follow up with pricing and lead time.
Contact HEMSUN +91-9979593687