PTFE / Teflon sintering ovens with SS-304 inner chambers and 6-inch insulation around the heating zone. A quoted cell uses a 1050 × 1050 × 1050 mm heating chamber, 950 mm trays, and 21 kW total load at 415 V / 50 Hz. Outer shell is MS sheet. Chamber size and kW rating are built to your billet load and cycle.
| Property | Value |
|---|---|
| Heating chamber (quoted) | 1050 H × 1050 W × 1050 L mm |
| Tray size | 950 H × 950 W × 950 L mm |
| Power | 21 kW total; 415 V / 50 Hz; 230 V control |
| Construction | Outer MS sheet; inner SS-304 |
| Insulation | 6 inch around heating chamber |
Batch sintering ovens for PTFE billets and moulded parts. Chamber size and kW rating are built to your load.
Batch sintering oven for PTFE billets and moulded parts. Inner chamber in SS-304 with 6-inch insulation around the heating zone.
| Property | Value |
|---|---|
| Heating chamber | 1050 H × 1050 W × 1050 L mm |
| Tray size | 950 H × 950 W × 950 L mm |
| Power | 21 kW total |
| Supply | 415 V / 50 Hz; 230 V / 50 Hz for control |
| Construction | Outer MS sheet; inner SS-304 sheet |
| Insulation | 6 inch around heating chamber |
A quoted oven uses a 1050 × 1050 × 1050 mm heating chamber with 950 mm trays, 21 kW total load, SS-304 inner sheet, MS outer sheet, and 6-inch insulation. Chamber size and kW rating are built to your billet load.
Yes. Compression-moulded PTFE billets, bushes, and gaskets are sintered in batch ovens after pressing. We can quote a press, die-set, and oven as a matched cell.
Send your specification and our engineering team will scope your PTFE components, hydraulic machine, or turnkey project — no obligation.
Tell us what you need — material, drawing, or sample — and we'll follow up with pricing and lead time.
Discuss Your Press Requirement +91-9979593687
