Multi Level Powder Press

How this press is built

The Multi Level Powder Press applies 286 Ton of rigid compressive force to produce multi level powder press components (Engineered to client drawing envelope (Build HSE-288)). A variable displacement hydraulic circuit accelerates cycle times while maintaining a steady 30-second dwell under load. Regulated pressure bleed-off eliminates internal cleavage stresses prior to automated part ejection.

Material behaviour under compaction

Engineered around the rheological behavior of high-grade engineered industrial material, the machine applies balanced compaction force to establish tight molecular interlocking. Consistent preform density translates directly into superior wear and chemical resistance in service.

Tooling and die design

Precision-ground guidance columns paired with bronze sleeve bushings guarantee alignment repeatability within ±0.01 mm. Tooling sets for multi level powder press components are engineered with air bleeding clearances to prevent powder blow-out during rapid compaction strokes.

Sizing and machine selection

When specifying this 286 Ton Multi Level Powder Press system, key inputs include part diameter/height, powder bulk density, and desired cycle automation. Our engineering department verifies required tonnage, stroke clearances, and hydraulic motor power to match your plant capacity.

Quality checks and inspection

Each press is tested against strict quality standards at our Dahegam facility: laser alignment of bolsters, continuous pressure dwell cycling, and green compact density verification.

Installation and commissioning

Every unit ships with complete documentation: circuit diagrams, hydraulic schematics, foundation drawings, and recommended spare parts lists. HEMSUN service engineers provide on-site installation, commissioning, and staff training support.

Export packing and lead time

The press is manufactured for international delivery with custom electrical voltages (415V/50Hz), robust export wooden boxing, and full customs and shipping documentation support.

Maintenance and spare parts

Upkeep protocols specify hydraulic fluid replacement at 2,000 hours, routine guide post greasing, and seal evaluations. Replacement valves and seal packages ship promptly from our Gujarat facility.

Safety and guarding

Operator protection is achieved through dual-channel infrared curtains, anti-tie-down pushbuttons, hydraulic counterbalance fall-prevention valves, and interlocked perimeter guarding.

Specifications