HMI Controlled Powder Press
HMI Controlled Powder Press — Performance Specifications, Press Tonnage & Tooling Layout
Designed and built at our Dahegam engineering works, the HMI Controlled Powder Press (Identifier HSE-862) provides automated pressing capacity for hmi controlled powder press components. Equipped with precision-ground tie-bars, proportional load control, multi-cavity tooling, and full international export compliance.
Applications
- Serial compaction and forming of hmi controlled powder press components for industrial processors (Workstation Ref: APP-5362).
- Integrated die-set tooling for hmi controlled powder press components with automated powder cavity charging and synchronized bottom ejection.
- Programmable density management on generic-hydraulic compounds with controlled pressure dwell cycles from 27s to 4min.
- Export-compliant production line equipped with multi-voltage electrical cabinet (415V/50Hz) and complete FAT documentation.
How this press is built
With an engineering rating of 601 Ton, the HMI Controlled Powder Press is optimized for high-volume compaction of hmi controlled powder press components across a Engineered to client drawing envelope (Build HSE-433) footprint. Dual-cylinder guidance controls platen descent, followed by progressive pressure build-up that holds for 33 seconds. A synchronized proportional relief valve vents fluid smoothly to avoid stress shear, enabling bottom-ram hydraulic ejectors to push out the intact green preform.
Material behaviour under compaction
Configured for high-grade engineered industrial material processing, the press delivers synchronized compaction that eliminates density gradients. Rigid bolster plates resist deflection, allowing preforms to process uniformly without axial distortion.
Tooling and die design
Bolsters feature precision-milled DIN standard T-slots and central ejector clearance openings. Hard-chrome plated guide pillars (50 µm layer, 60 HRC) ride within self-lubricating phosphor bronze guide bushes with spiral oil grooves, ensuring long-term punch concentricity for hmi controlled powder press components dies.
Sizing and machine selection
Specifying this 601 Ton HMI Controlled Powder Press press involves reviewing part envelope, cavity layout, and cycle times. Contact our Dahegam engineering department with your drawings for a tailored machine quotation.
Quality checks and inspection
Quality benchmarks include laser-guided platen alignment verification, hydraulic overpressure relief testing, safety circuit validation, and trial compaction of sample parts with density analysis before shipment.
Installation and commissioning
Installation documentation includes foundation drawings, electrical panel schematics, and hydraulic piping diagrams. HEMSUN provides on-site commissioning and operator maintenance instruction.
Export packing and lead time
The machine is prepared for international export with destination-specific electrical wiring (415V/50Hz), seaworthy packaging, and comprehensive IEC shipping documentation from our Gujarat manufacturing hub.
Maintenance and spare parts
Maintenance requirements involve regular hydraulic oil filtration (ISO VG 68), guide post lubrication via grease nipples, and annual seal inspections. Replacement seal kits and solenoid spares are readily available.
Safety and guarding
Standard safety features include optical light curtain arrays, concurrent two-hand cycle initiation, pilot-operated check valves against ram drop, and prominent emergency stop switches.
Specifications
| Property | Value |
|---|---|
| Machine Series & Model | HMI Controlled Powder Press (Series HSE-862) |
| Rated Tonnage Capacity | 200 Ton (High-Tonnage Compression Press) |
| Target Part Size Envelope | Engineered to client drawing envelope (Build HSE-433) |
| Platen Bolster Dimensions | 460 × 460 mm CNC precision milled bolster |
| Daylight & Ram Stroke | 820 mm daylight / 660 mm main ram stroke |
| Specific Compaction Pressure | 3,500–5,000 psi (350–500 kg/cm²) |
| Pressure Dwell Control Band | 1 minute to 8 minutes multi-stage dwell curve |
| Main Motor & Electricals | 20 HP 3-Phase 415V (High-tonnage proportional unit) |
| Hydraulic Reservoir Volume | 190 Liters ISO VG 68 reservoir with heat exchanger |
| Overall Machine Dimensions | 1850 × 2250 × 2950 mm |
| Automation & PLC Architecture | CNC Touchscreen Console with Proportional Pressure Ramps |
| Manufacturing & Testing Origin | Fabricated, Assembled & Tested at Dahegam, Gandhinagar, Gujarat, India |
Related Machinery, Tooling & Technical Guides
Category & Machinery Hubs
Engineering Process Guides
Frequently Asked Questions
What is the HMI Controlled Powder Press used for?
The HMI Controlled Powder Press from HEMSUN ENGG. INDUSTRIES is engineered for Serial compaction and forming of hmi controlled powder press components for industrial processors (Workstation Ref: APP-5362).; Integrated die-set tooling for hmi controlled powder press components with automated powder cavity charging and synchronized bottom ejection.; Programmable density management on generic-hydraulic compounds with controlled pressure dwell cycles from 27s to 4min.. Share your part drawing, powder type, and annual volume so we can match tonnage, cavity layout, and automation.
Can HEMSUN customize the HMI Controlled Powder Press tonnage and controls?
Tonnage options include 200 Ton (High-Tonnage Compression Press). Control packages include 1 minute to 8 minutes multi-stage dwell curve. Specifying this 601 Ton HMI Controlled Powder Press press involves reviewing part envelope, cavity layout, and cycle times. Contact our Dahegam engineering department with your dr…
Do you install and train operators for the HMI Controlled Powder Press?
Yes. Installation, commissioning, and operator training are available for domestic and export shipments. Fabricated, Assembled & Tested at Dahegam, Gandhinagar, Gujarat, India. Export documentation (commercial invoice, packing list, certificate of origin) is provided for qualified orders.
Related
Related Machines
Get Started
Ready to Put Your Drawing Into Production?
Send your specification and our engineering team will scope your PTFE components, hydraulic machine, or turnkey project — no obligation.
- Quote response within 24 hours
- Built entirely in our own facility
- Export documentation included
Request a Quote
Tell us what you need — material, drawing, or sample — and we'll follow up with pricing and lead time.
Contact HEMSUN +91-9979593687 32+ Years
32+ Countries
IEC Registered