Electrical Fixtures

Scope and process

Engineering workflow for electrical fixtures at Dahegam, Gandhinagar, Gujarat, India: 3D CAD modeling of part workholding envelope → FEA clamping force and deflection analysis → CNC machining of hardened baseplates and locator nests → grinding of locating dowels and wear pads → laser CMM verification of critical datum points.

Materials we work with

Non-conductive contact faces where the fixture touches the assembly, with routing that keeps harnesses clear of clamps.

Tooling support

Locates on housings and mounting features, with non-conductive contact where needed.

Choosing the right option

When requesting a proposal for electrical fixtures, please provide component 3D CAD models (STEP/IGES), 2D part drawings indicating critical datums, machine table specifications (T-slot pitch, pallet size), and target cycle time. Quotes with 3D concept layouts are issued within 24 hours.

Quality checks and inspection

On a fixture the check that matters is that contact points do not mark or short the assembly, and location repeats. Dimensions are verified on CMM against the fixture drawing before despatch.

Commissioning and handover

Proved by fitting a live assembly and confirming no contact point marks the insulation or bridges a circuit.

Export packing and lead time

Ships assembled with locating elements fitted and clamp positions set. HEMSUN is a DGFT IEC registered exporter (Government of India); commercial invoice, packing list and certificate of origin accompany international despatch.

Maintenance and spare parts

Insulating contact faces degrade and harness routing gets adapted on the shop floor. Inspect both.

Specifications